Products

> Flow > Electromagnetic Flow Meter

Electromagnetic Flow Meter

Insertion Electromagnetic Flow Meter

Simple structure
No moving parts
Long service life
Strong interchangeability
With stop valves, easy installation&maintenance

contact us
share to:
  • Features
  • Download

Description

GMF400 Insertion electromagnetic flow meter is composed of insertion electromagnetic sensor and electromagnetic flow converter, used to measure the conductive liquid that electrical conductivity is greater than 5 us/cm , it is used to measure the water, sewage, acid, alkali and other medium. Suitable for measuring the large pipe of diameter DN300~DN3000mm,. Installation can be divided into a online installation type of the cut-off valve and water control installation type without stop valves.

详情_01.png

Insertion flow meter devices measure the point velocity of the liquid in a pipe.  Flows in very large pipes can be measured this way using relatively inexpensive metering devices. Essentially an appropriately sized hole is drilled into the pipe wall and a means of securing the insertion meter is applied. This can be a saddle clamp, weld-on threaded stub or a mating flange.


Product Show

Suitable for very large pipes / Easy to service and replace 
Lower cost than a full bore meter, especially at larger sizes 

详情_03-水印.png

photobank (41).jpg

Type application:

Boiler feed water / Chilled water / loop condenser water

Irrigation systems / Municipal water distribution / Ground water remediation

Chemical processing / Steam flow in plant rooms / Pump protection

Digester Bio-gas / Wastewater / Mining

intersion electromagnetic flow meter


Specifications

Medium

Water, sewage water , acid, alkali  etc.

Diameter DN300~DN3000mm
Accuracy 士2.5%

Medium 

temp.

-20~150℃
Nominal pressure 1.6Mpa

Flow  rate

0.5~6m/s

Straight  pipe 

required

Upstream ≥5DN, downstream ≥3DN
Electrode 316L,Hastelloy C(HC),Titanium(Ti),Tantalum(Ta),Platinum(Pt)
Installation  Without a ball valve or with a ball valve
Body material Stainless steel
Power supply 220VAC/24VDC/lithium battery
Signal output Pulse and 4~ 20mA
Communication RS485, Hart, GPRS, etc.
Explosion-proof No
Protection proof IP65 (compact type); IP68(suitable for remote type)

Environment

Ambient temperature:-20~+60℃ ,Ambient humidity: 5%~90%