Tel
029-81292510WeChat ID
WeChat Official Account
> Water Analysis > Conductivity meter
1. High accuracy and good stability
2. Wide measurement range (maximum 300ms/cm)
3. Direct output RS485 and 4-20mA
4. Automatic temperature compensation
GEC-EC485 digital conductivity sensor is a new generation of intelligent water quality detection digital sensor independently developed by our company. Without a host, directly measure the conductivity value (or TDS value) and temperature value in the solution, and transmit the output 4-20mA signal to the back-end equipment. It can also be connected to the RS485 interface, and connected to the computer through the MODBUS protocol to realize monitoring and recording.
Accuracy | ±2%FS |
---|---|
Measuring range | 0~20ms/cm(Customized 300ms/cm) |
Temperature range | 0~60℃ |
Temperature accuracy | ±0.3℃ |
Output | 4-20mA,RS485(Modbus) |
Power supply | 12VDC/24VDC |
Protection grade | IP68 |
Installation thread | G3/4 |
cable length | Standard 5m ( customized) |