Industry Application

CIP Cleaning Process

2019-02-21

share to:

Description

CIP (cleaning in place) cleaning system is commonly known as in-situ cleaning system. It is widely used in beverage, dairy, juice, pulp, jam, wine and other mechanized food and beverage production enterprises.

CIP is mainly composed of alkali tank, acid tank, hot water tank, various pipes and pneumatic valves, pressure transmitter, conductivity meter, platinum thermal resistance and control system. Without disassembling or moving the device, the centrifugal pump can be used to transport the cleaning liquid, and forced circulation in the material pipelines and equipment to achieve the purpose of cleaning.

The advantages of the CIP cleaning system: ensure a certain cleaning effect and improve product safety; save operating time and improve efficiency; save labor and ensure safe operation; save water, steam and other energy, reduce the amount of detergent; production equipment can achieve large-scale, High level of automation; prolong the service life of production equipment.

The mechanism of CIP cleaning is mainly completed by adding chemical reagents, so the detection of the flow, temperature, pressure, water quality and other parameters of the entire CIP cleaning system directly determines the final cleaning effect.

CIP Cleaning Process

CIP清洗工艺英文.jpg

1.Raw water supply flow measurement

In the CIP cleaning system, the water after the pipeline cleaning is mixed with various substances, and the water quality is poor. At this time, an electromagnetic flowmeter is needed to measure the flow.

原水.png

Electromagnetic flow meter

More suitable for raw water measurement

›Diameter :DN10~DN2200

High-precision measurement: ±0.5%

Forward and reverse flow measurement

Multiple output communication: 4-20mA, pulse output, RS485

Multiple power supply modes: 220VAC / 24VDC / lithium battery

2.Circulating water flow measurement

In the CIP cleaning system, water is constantly consumed, and water is replenished from time to time. In order to measure the amount of replenished water, a flowmeter that does not damage the pipeline and can meet the measurement of large diameter flow is required.

循环.jpg

Ultrasonic flow meter

No need cut pipe

Wide measuring diameter:DN15~DN6000

High-precision measurement: ±0.5%

Forward and reverse flow measurement

Multiple output communication: 4-20mA, pulse output, RS485

Multiple power supply modes: 220VAC / 24VDC


3.Steam flow measurement

The heat exchange system heats the medium in the cleaning pipeline, so the measurement of steam flow becomes very important.

蒸汽.jpg

Vortex flow meter

Wide measuring diameter:DN15~DN1800

Multiple installation methods: clamping, flange, insertion, etc.

Multiple explosion-proof: intrinsically safe, flameproof

Multiple output communication: 4-20mA, pulse output, RS485

Multiple power supply modes: 220VAC / 24VDC / lithium battery


4.Temperature measurements

      Temperature is one of the most common measurement parameters in CIP cleaning. GAIMC provides a full range of temperature sensors such as thermal resistors, thermocouples, temperature transmitters and accessories to meet all temperature measurement requirements of the CIP cleaning process..

      温度.jpg

Rtd/Thermocouple

     Can be used in power plant temperature measurement, according to the actual application of selection.


Head mounted temperature transmitter

    Measuring the temperature through a temperature sensor, the transmitter processes the signal into a standard industrial signal and transmits it to the back-end device.


Wireless temperature transmitter

No wiring in the field, saving installation costs, directly transfer the measured temperature to the back-end equipment by wireless means.


5.Water quality measurement

    The water quality monitoring during the CIP cleaning process can minimize pipeline corrosion and ensure the final cleaning effect.

  水质.jpg

  pH controller

Multiple electrodes for different working conditions

Simultaneous measurement and display of pH / OPR and temperature

Isolated transmission output, more stable signal

       ›Manual/automatic temperature compensation for more accurate measurement

High and low alarm function

IP54 protection


Conductivity Meter

Multiple electrodes for different working conditions

Simultaneous measurement and display of EC / TDS and temperature

Isolated transmission output, more stable signal

       ›Manual/automatic temperature compensation for more accurate measurement

High and low alarm function

Guard dog against crash


6.Record display

    During the CIP cleaning process, parameters such as flow, temperature, pressure, and water quality are involved. All parameters can be processed, displayed, and stored by a paperless recorder.

Paperless recorder

 Multiple signal inputs, mA, V, mV, TC, RTD, etc.

 Multi-channel input, can connect up to 40 channels

 Multiple communication outputs, relays / 4-20mA / RS232 / RS485

       › Multiple power supply methods, 24VDC / 220VAC

› Can be connected to micro printer, print data and curve in real time / time