Transformer

    The transformer needs to monitor the temperature of the wire connector in real time to ensure that the operating temperature of the wire connector is within a safe range to avoid cable failures and fire accidents caused by overheating. At the same time, temperature abnormalities can be detected in time and corresponding measures can be taken to extend the service life of wire connector and equipment. Furthermore, it can also provide early warning of wire connector failures, repair and replace them in time, and ensure the normal and safe operation of the transformer.

Transformer wire connector temperature measurement  currently usually faces problems such as inaccurate temperature measurement, long measurement cycle, insufficient real-time performance and difficulty in data processing. GAIMC's temperature sensor, specially designed for temperature measurement of transformer connector, can solve these problems very well, realize real-time monitoring and remote management of the temperature of transformer wire connector, improve measurement accuracy and real-time performance, and facilitate data processing by back-end systems. and analysis.

1. The copper probe has good thermal conductivity, fast response and high temperature measurement accuracy.
2. The copper nose structure design is easy to install, strong and reliable, and not easy to loosen or fall off.
3. Single bus multi-point temperature measurement, monitoring the temperature of multiple points at the same time, facilitating on-site temperature monitoring and management.
4. Digital signal output facilitates data collection and analysis.